No products in the cart.
Rechargeable 3D Print Moon Lamp 2 Color Change Touch Switch
1. 3D printing technology: print layer by layer, restore the real appearance of the moon
2. Charging port and switch integration: simple, beautiful and practical, easy to operate
3. Warm and gentle LED lights: touch the metal ring to switch the color and turn off the light
4. You can hold it on your hand. Easy to put anywhere you like with the wood holder
5. Safe and environmentally friendly: PLA material extracted from corn stalks, hard and smooth, non-toxic, odorless, environmentally friendly
6. Long using time: 240mAh built-in battery, after the full charge, the lamp can be used 8 – 30 hours, a full charge takes about 6 – 8 hours
7. A perfect gift: express your love with this warm gift. Your kids or beloved one are unable to resist this charming gift. And it’s also a great decoration for your house
8. 6 diameters of the moon light to choose: 8cm, 10cm, 12cm, 15cm, 18cm
Name:3D printing touch moon light
Materials:PLA plastic
Specifications:please refer to thr diameter of the product
Brightness: Stepless Adjustment
Color temperature: 3000K / 6000K
Battery capacity:400MHA
Charging time: 6 – 8 hours
Working time: 3-8hours ( depends on brightness )
Charging mode:USB DC5V
Charging current:1A
Using environmrnt:0-40<75%
1. Touch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from white to yellow.
2. Long press the metal ring to adjust the brightness, and it has the brightness memory function.
3. If your hand is too dry or the temperature is too low, the light may not respond.
4. The white light will not shine when power is low.
5. Insert the DC connector into the metal ring at the bottom of the moon lamp to charge, the red light is always on during the charging.
6. The red light will automatically turn off when fully charged.
Notice:
1.When charging,the ball becomes red,full,and then extinguished;
2.Because the installation of the circuit required,the sphere edge will have seam(as shown).
3.3D priting forming principle causes the object surface to have the contour line phenomenon.
4.This product does not have waterproof ability,not strong acid,alkali.
5.This product can not be strongly hit or fall from high places.
| Weight | 180.0 g |
|---|---|
| Dimensions | 160 × 160 × 160 cm |
| Size | 8cm, 18cm, 15cm, 13cm, 12cm, 22cm, 10cm, 20cm |
| Style | Normal, Upgraded, Remote control |
Be the first to review “Rechargeable 3D Print Moon Lamp 2 Color Change Touch Switch”
Related products
$59.00
Sale!
Pendant Lights
$49.00
Pendant Lights
$79.00
Pendant Lights
$45.00
You have not viewed any product yet.
Reviews
There are no reviews yet.